600m3/h 1120m3/h 150m 175m Horizontal Mining Industry Water Submersible Mine Pump
Mining water submersible pump types:
(Notice: flow rate, head meters, voltage and material or other SPECIAL specifications, ODM OEM is acceptable)
| Type | Flow rate | Head meter | Power |
| QK100-240/3-120 | 80 | 300 | 120 |
| QK100-400/5-180 | 100 | 400 | 180 |
| QK100-640/8-300 | 100 | 640 | 300 |
| QK150-320/4-220 | 150 | 320 | 220 |
| QK150-480/6-350 | 125 | 576 | 350 |
| QK150-560/7-410 | 180 | 464 | 410 |
| QK150-640/8-470 | 125 | 768 | 470 |
| QK150-720/9-520 | 150 | 720 | 520 |
| QK150-800/10-600 | 150 | 800 | 600 |
| QK200-200/2-200 | 220 | 175 | 200 |
| QK200-300/3-300 | 220 | 273 | 300 |
| QK200-400/4-410 | 400 | 400 | 410 |
| QK200-500/5-470 | 500 | 500 | 470 |
| QK200-600/6-600 | 200 | 600 | 600 |
| QK200-700/7-600 | 200 | 700 | 600 |
| QK200-800/8-720 | 20 | 728 | 720 |
| QK200-900/9-850 | 200 | 900 | 850 |
| QK200-100/10-1000 | 220 | 910 | 1000 |
| QK300-100/2-140 | 300 | 100 | 140 |
| QK300-800/16-1150 | 300 | 800 | 1150 |
| QK400-200/4-350 | 400 | 200 | 350 |
| QK400-400/8-720 | 400 | 400 | 720 |
| QK560-255/3-620 | 560 | 255 | 620 |
| QK560-340/4-850 | 630 | 303 | 850 |
| QK1120-85/2-420 | 1120 | 85 | 420 |
| QK1120-170/4-850 | 1120 | 170 | 850 |
| QK1120-255/6-1300 | 1400 | 234 | 1300 |
| QK1120-340/8-1700 | 1120 | 340 | 1700 |
| QK1120-425/10-2200 | 1400 | 390 | 2200 |
| QK1120-510/12-2400 | 1120 | 510 | 2400 |
It’s a professional electric submersible pump type for mine, running continuously 24 hours for mine dewatering.
-- Flow rate: 80m3/h-2000m3/h
-- Head meters: 16m-900m
-- Voltage: 380v/440v/460v/480v/660v/1100v/3000v/6000v or as per request
-- Frequency: 3 phase 50hz/60hz
-- Material: cast iron or stainless steel
-- Install: Vertical or horizontal
Notes for mine industry submersible water pump:
1. The motor must be filled with water.
2. The instructions must be read before installation and use.
3. Ensure the flow rate of water on the surface of the motor. If it cannot be guaranteed, install a deflector (cooling water cover).
4. The electric pump must be reliably grounded for non well applications.
5. The electric pump must fully submerge into the water, and the minimum water level shall be 2m higher than the pump inlet during operation.
6. If it is necessary to test run the submersible pump on the ground, the pump cavity must be filled with water or other lubricating fluid. Otherwise, the sliding bearing will be damaged.
How to get quotation quickly?
1. What's flow rate and head meters?
2. Is the water clean or dirty?
3. Is there too much solid in the water? What's the max size of the solid?
4. Is there any limits on the pump outside diameter?
5. Is the water corrosive?
Product Tags:
|
|
Large Capacity Multistage Electric Mining Industry Water Submersible Pump Images
|
