10 Inch 125m3/h 160m3/h 30m 60m 160m 22kw 45kw 75kw 90kw 110kw Electric Water Submersible Pump
10 inch submersible pump models:
| Pump Diameter | Model | Power | Flow | Head |
| Inch (") | QJ type | kw | hp | m3/h | m |
| 10" | 250QJ125-16/1 | 9.2 | 13 | 116-134 | 13-19 |
| 10" | 250QJ125-32/2 | 18.5 | 25 | 116-134 | 27-37 |
| 10" | 250QJ125-48/3 | 25 | 35 | 116-134 | 40-56 |
| 10" | 250QJ125-64/4 | 37 | 50 | 116-134 | 54-73 |
| 10" | 250QJ125-80/5 | 45 | 60 | 116-134 | 68-92 |
| 10" | 250QJ125-96/6 | 55 | 75 | 116-134 | 82-110 |
| 10" | 250QJ125-112/7 | 63 | 85 | 116-134 | 95-128 |
| 10" | 250QJ125-128/8 | 75 | 100 | 116-134 | 109-147 |
| 10" | 250QJ125-144/9 | 90 | 120 | 116-134 | 124-164 |
| 10" | 250QJ125-160/10 | 90 | 20 | 116-134 | 136-184 |
| 10" | 250QJ125-176/11 | 100 | 35 | 116-134 | 150-202 |
| 10" | 250QJ125-192/12 | 110 | 150 | 116-134 | 163-220 |
| 10" | 250QJ160-25/1 | 18.5 | 25 | 148-172 | 22-30 |
| 10" | 250QJ160-30/2 | 22 | 30 | 148-172 | 28-32 |
| 10" | 250QJ160-45/3 | 30 | 40 | 148-172 | 43-47 |
| 10" | 250QJ160-60/4 | 45 | 60 | 148-172 | 57-63 |
| 10" | 250QJ160-75/5 | 55 | 75 | 148-172 | 72-78 |
| 10" | 250QJ160-90/6 | 63 | 85 | 148-172 | 77-94 |
| 10" | 250QJ160-105/7 | 75 | 100 | 148-172 | 100-110 |
| 10" | 250QJ160-120/8 | 90 | 120 | 148-172 | 125-115 |
| 10" | 250QJ160-135/9 | 100 | 135 | 148-172 | 130-140 |
| 10" | 250QJ160-150/10 | 110 | 150 | 148-172 | 144-156 |
FAQ:
1. What's MOQ ?
----MOQ is 1 pcs.
2. How to get price for electric water submersible pump?
----Please message your submersible pump requirements if you know according to your local site, so that we could quote price asap.
As you know, we are a pump factory, hundreds of electric water submersible pump models to quote price. Like you order goods in ebay, to know what you want.
----One most important thing to quote price: a name card with your email and Whatsapp, address(to quote shipping cost).
3. What's deliver time of electric submersible pump?
-----Firstly, email your requirements. Then we will know the production time and which port to your country.
The cast iron submersible pump main part material as below:
1. The pump impeller, pump casing coupling part and motor casing is cast iron material.
2. The pump shaft is stainless steel material.
3. The bearing is graphite.
4. The winding is 100% copper with polyethylene insulation layer.
5. The rotor end ring is copper.
6. The stator casing is with 45# steel.
7. The stator is cold rolling silicon steel.
Electric submersible pump applications:
Submersible irrigation pump submarine water pump is a direct mounted pump combining the motor and pump‘together.
It can be used as water suction equipment for groundwater, river, reservoir and canal etc.This pump is mainly used for agriculture irrigation, water supply for human and animal in plateau and mountain area, and water drainage in city, factories, railway system, mining area and construction site.
Working conditions of deep well electric submersible pump:
1. Three-phase power supply, voltage 380V (error less than 5%), frequency 50Hz (error less than 1%).
2. Motor must be filled with clean water.
3. The primary impeller of the pump should be immersed at least 2m under dynamic water level. The pump unit shall be less than 70m deep under static water level. The foot of motor shall be at least 3m above well bottom.
4. Water temperatureshould not higher than 20 ℃.
5. Sand content of the water (by quality) not more than 0.01%.
6. Water PH 6.5~8.5.
7. The content of hydrogen sulfide in watershould not be more than 1.5 mg/l.
8. The content of chloridion in water shouldnot be higher than 400mg/l.
9. The water source must provide enough water for the pump to work continuously.
Product Tags:
|
|
10 Inch 125m3/h 160m3/h 30m 60m 160m Electric Water Submersible Pump Images
|
